WeAct Studio Blog

Tutorials for our boards and instruments, plus engineering notes.

5 posts

Seven years of WeAct Studio

Seven years in, our schematics, outlines and 3D models are public. This is how the product line grew.

Oct 29, 20267 min read

How to connect the analyzer, capture, read the waveform, decode a protocol and save the result.

Jan 1, 20206 min read

A walk through MicroPython on the STM32F411CE core board: every peripheral, its pin mapping, and a working snippet for each.

Nov 30, 20195 min read

How to flash an STM32 board over SWD, serial ISP or USB DFU, how to wire each one, and the errors that come up most often.

Nov 30, 20192 min read

Using the Logic Analyzer V1 with sigrok PulseView: driver setup, supported decoders, and the questions that come up most.